Skip to main content
Fast 24 Hour Air Conditioning and Heat Pump Service

Top Quality Workmanship, BBB A+ Rated, AZ ROC Complaint Free

Call Now (480) 699-2516

Poor Phoenix Air Quality Results in EPA Freeze of Federal Transportation Funds

Written by Rm Harrington on . Posted in AC Installation, AC Service, Air Purification, Trane.

Trane Air Purification Reduces Poor Air QualityFlashback to 2010 Phoenix Air Quality – Viewpoint of the Environmental Protection Agency (EPA)

On May 25, 2010, the EPA announced an impending block on federal transportation funds unless Arizona could come up with an acceptable and reliable air quality control plan. According to the EPA, Arizona pollution levels exceeded federal standards. The agency completely rejected the concept that dust storms were the cause of Phoenix air quality problems. EPA regional administrator, Jared Blumenfeld declared the so-called “exceptional events” as an unscientific explanation for Arizona air quality complications.

The Importance of Air Purification

During 2008, Phoenix experienced eleven unacceptably high PM-10 pollution spikes. Arizona officials attributed ten of those spikes to dust storms. In 2010, the EPA declared Arizona out of compliance. PM-10 is measured as one-seventh the width of a human hair, yet the effects on human health include:

  • Breathing problems
  • Cancer
  • Lung damage
  • Respiratory failures
  • AND premature death.

 The primary at-risk groups affected by high levels of PM-10 include: children, the elderly and people with existing asthma, chronic lung disease and influenza. Yet efficient air purification works to make life better for all Phoenix residents.

 Update 2013 – A Current Look at Phoenix Air Quality

Government processes are sometimes difficult to understand. For example: According to current reports from the Arizona Department of Environmental Quality (ADEQ), Phoenix air quality levels are reasonably good. Daytime highs are running around 108-degrees Fahrenheit and will reach 110 by the middle of next week. Up until Tuesday of next week, chances of storms are low but moisture levels will slightly increase. By mid-week, rain and cloud cover should hold ozone concentrations in the normally accepted “Good” range. Sounds like a good report yet the EPA has issued a freeze on Federal Transportation Funds.

In the later half of next week, sunshine will push Phoenix ozone levels back into the mid-moderate range. The Humboldt Mountain region may kick in at a mid-moderate range of 71. Meantime, Glendale residents can expect a maximum 8-hr PPB of 41 and Tempe PM-2.5 particles may run a 9.8 max 24-hour value. Throughout the Phoenix region, PM-10 particles are ranging 25 to 30.

Considering that maximum unhealthy ozone levels range between 200 and 300 on the measurement scale, a 42 in Phoenix and a 41 in Mesa seems a minor issue.

Building Arizona – Air Quality And Air Purification A Continuing Battle

According to We Build Arizona, the state’s current transportation needs between now and 2030 will result in a $162,3 billion shortage. Arizona air quality remains an issue. Areas such as Maricopa and Pinal County struggle to meet EPA requirements and may, as a result, lose an additional $1.8 billion in federal transportation funding.

In 2012, Phoenix, Mesa and Scottsdale ranked top of the most-polluted list for year-round particle levels. Residents in such cities face year-round particle pollution that includes:

  • Aerosols
  • Dust
  • Soot
  • AND other unhealthy breathable substances.

Spikes in particle pollution can be short-term or long-term, sometimes lasting for days. It’s a complex problem that will not go away quickly.

Helping Yourself – Trane CleanEffects™ Air Filtration

Correcting the dangers of poor Phoenix air quality is a government process that requires the help of businesses and individuals. Although you may not have the position, power or finances to initiate direct influences of major proportion, you do have the power to make small differences.

Here’s how you can help reduce the Phoenix air quality problem:

  • Practice environmentally balanced driving habits
  • Make use of public transportation
  • Avoid blowing or sweeping debris and dust into the streets
  • Plan your next vehicle around Green Choice options
  • Close and seal household chemicals, cleaners, garage and solvents
  • Buy Energy Star products
  • Upgrade your older energy-hog heating and cooling system to an energy-efficient solution
  • Work with an environmentally responsible Trane Air Conditioning Installation expert
  • Install a Trane CleanEffects™ Air Filtration system.

Meet Arizona’s best-stocked Air Conditioning Professional, American Cooling and Heating. Here to provide you with 24/7 Phoenix AC Installation, ACH handles quality Trane air filtration equipment, Trane heat pumps, Trane air handlers and Trane AC units.

The Trane CleanEffects™ is the most effective air filtration and air purification device in the world. Designed for 99.98 percent allergen removal, this system sets the standard for indoor air quality. Make your Arizona home virtually dust free. Call now to schedule your free ACH inspection and estimate. The Trane CleanEffects™ air filtration device helps your HVAC system maintain a clean and healthy indoor environment.

Call now:

 

 

 

Trane XR13 Heat Pump Review – Trane Product Performance Report

Written by Rm Harrington on . Posted in AC Service, Heat Pumps, Trane.

Focusing on the Performance of the Trane XR13 Heat Pump

Designed for performance and durability, all Trane Heat Pump products are engineered according to strict quality control standards designed to set the Trane brand apart above the normal of common industry values. From development of the Climatuff® compressor to creation of the elite Spine Fin™ coil and the ground-breaking Hyperion® air handler system, each individual Trane component is custom crafted to perform above the level of generic off-the-shelf air conditioning equipment. But is the Trane XR13 really an efficient heating and cooling solution for your air conditioning project?

Let’s start with the basic specs for the XR13 HP. What can you expect in performance and enhancements? The XR13: 

  • Meets new federal regulations
  • Functions quietly
  • Uses a Trane Climatuff® compressor and a Trane Spine Fin™ coil
  • Can produce up to 14.50 SEER and 8.50 HSPF
  • Is crafted for long-term durability
  • Variable speed inside blower
  • Uses Galvanized-steel louvered panels
  • Includes baked-on powder coating
  • Uses fasteners crafted with corrosion-resistant Weatherguard™
  • Incorporates a rust-proof DuraTuff™ basepan
  • Supports add-on of the Trane CleanEffects™ air filtration system
  • AND carries a 10-year Registered Limited Warranty that includes the compressor, the outdoor coil and all internal functional parts*.

Now all this sounds cool – pardon the pun, but what does it mean in real world applications and in comparison to other heat pump products?

Comparison Cost Versus Efficiency

The Trane XR13 Heat Pump provides a slight advantage over the cost versus efficiency of the XB14 and the XR15. Although both the XB14 and the XR15 are better performers, the cost of each exceeds that of the XR13. For example:  

  • The XB14 costs around 25-percent more than the 13, yet the efficiency ratings only increase by around 12-percent.
  • Likewise, the XR15 exceeds the cost of the XR13 by around 30-percent but only increases efficiency by around 22-percent.

This cost versus efficiency evaluation compares Trane to Trane. Different brands will still compare in a similar manner. However, you should remember that Carrier still uses copper coils, which are more expensive that the aluminum coils used in Trane. And, of course, not all air conditioning manufacturers practice the same standards as Trane. Less expensive equipment does not mean poorer quality, but it can me less technical support, more limited warranties and various difficult to spot production-cost savings.

Final Comparisons 

The cost factors of the above figures are not all inclusive. SEER and HSPF are not the only dynamics of air conditioning performance and efficiency. In an area with temperatures as high as those found in Phoenix Arizona, you must also consider humidity, the structure of the home and the extended exposure to grueling heat waves. 

Furthermore, the condition of your existing home duct system and insulation performance must also be considered. Only a licensed, bonded and insured Phoenix Trane Heat Pump Installation professional can answer all of your questions. But in the mean time, here are the basic pros and cons of the Trane XR13 Heat Pump:

Trane XR13 HP Pros  

  • Low priced
  • Capacity range of 1.5 to 5 tons
  • Rates above average against other compatible low-end models
  • Uses one of the shortest profiles in the HVAC industry
  • Provides great cost versus efficiency value
  • Qualifies for up to $500.00 in Eco Rebates 

Trane XR13 HP Cons   

  • Low-end model
  • Does not qualify for Energy Star rating
  • Uses single stage compressor
  • Sometimes a bit too loud for comfort

American Cooling and Heating Providing Phoenix Air Conditioning Solutions

Keep in mind: Low-end is not by default insufficient. For many homeowners, the Trane XR13 provides a reliable cost-efficient and energy efficient solution to their Arizona heating and cooling requirements. American Cooling and Heating provides Phoenix air conditioning installation and service solutions throughout Mesa, Gilbert, Scottsdale, Oeoria, Chandler and other local areas. The techs are trained and certified to install, service or repair any type of residential, commercial or industrial heating and cooling equipment. The service team is on call 24/7/365. 

* Warranty must be registered by e-mail or phone within 60-days of Trane XR13 Heat Pump installation.

About AC&H

We sell all brands of Air Conditioning and Heat Pumps equipment, including expert Arizona AC and HP replacement of Carrier, Goodman, Amana, Rheem, Trane, Lennox, Ruud, York, and all brands and types of Air Conditioning and Heat Pump Units and all AC Systems.

Call today!

American Cooling and Heating Announces Reduced Trane AC Pricing and Trane Heat Pump Sale Throughout Chandler, Gilbert, Mesa, Scottsdale, Tempe and Other Primary Phoenix AZ Regions

Written by American Cooling And Heating on . Posted in AC Installation, Trane.

Arizona Central Air Conditioning Dealer, AC&H, Is Currently Providing Steep Discounts On All Trane AC Installations and Trane Heat Pump Products, Including Reduced Pricing For AC Installations

American Cooling and Heating is introducing reducedTrane AC pricing for Trane Heat Pump products andTrane AC products, including Energy Star rated models. The savings come just in time to help Arizona residents combat the dangers of Monsoon season. Homeowners and business owners are seeking air conditioning systems that help improve energy performance while lowering cooling expenses. As a world leader in efficient heating and cooling solutions, AC&H has the company contacts that enable discount sales on the quality of equipment that can meet new customer demands.

“Record temperatures continue to plague the Valley. Phoenix area homeowners and business owners are seeking cost effective heating and cooling solutions that meet and exceed EPA climate control regulations and expectations. Through price reductions gained by bulk inventory purchases, American Cooling and Heating is equipped and ready to provide immediate AC and Heat Pump installation savings to residents and businesses throughout Chandler, Gilbert, Mesa, Scottsdale, Tempe and Phoenix,” General Sales Rep, AC&H Regional Phoenix Division.

Energy Star Rated HVAC Systems Priced To Beat Out All Competition

Trane AC equipment is:

• High-performance 
• Energy Efficient 
• Durable 
• Effective 
• Reliable 
• Beautifully Designed 
• AND Fully Warranted By Both the Manufacturer and AC&H.

AND now, due to passed on cost savings, AC&H discount prices make owning a Trane AC or a Trane Heat Pump product fully affordable to everyone within the Valley Metro, including residents of Chandler, Gilbert, Mesa, Scottsdale, Tempe and Phoenix.

Equal Pricing Without Regard To Distance

As a Valley Metro heating and cooling service center, American Cooling and Heating can provide the same pricing throughout the area. Providing that labor requirements do not deviate beyond reasonable measures, a Gilbert AC installation project gets priced no different from a Phoenix AC installation of the same model of Trane AC equipment. Likewise, a Scottsdale Trane Heat Pump installation can be priced identically with a Glendale Trane Heat Pump installation that uses the same model of equipment.

Urgent Need To Act

The National Weather Service (NWS), in conjunction with the Arizona, has declared the week of June 10 through June 15 as Monsoon Awareness Week. Temperatures in Mesa, Tempe and other Phoenix areas are expected to hit 110 by Wednesday. Even nightly temperatures will hover in the low eighties. The NWS suspects that this week’s Valley temperatures may exceed the 1918/1974 records of 112 degrees. The region is already running six and seven degrees higher than the temperatures for this time last year.

American Cooling and Heating is responding to the urgency of the situation. There is no better time to save on the price of a Trane AC Installation or a Trane Heat Pump product replacement.

AC&H provides:

• Free Estimates 
• Timely Service 
• Professional AC Installation 
• 24-Hour Emergency Service 
• Excellent Warranty Protection 
• AND An Inpeccable Reputation For Quality Work and Competitive Arizona Air Conditioning Pricing.

The American Cooling and Heating service team provides quick, efficient and cost effective Trane Air Conditioning and Trane Heat Pump repair or installation in Chandler, Gilbert, Glendale, Mesa, Peoria, Phoenix, Scottsdale, Tempe and all surrounding areas in Arizona. Make your appointment today.

East (480) 699-2516 
Central (602) 734-5422 
West (623) 335-7697

Please visit: https://americancoolingandheating.com/

Trane Air Conditioning Services In Arizona By American Cooling And Heating

Arizona A/C Service American Cooling and Heating Announces Expanded Support For Gilbert AZ Trane Air Conditioning Systems Repair And A/C Installations

Written by American Cooling And Heating on . Posted in AC Repair, AC Service, Trane.

In Order to Assure Gilbert Arizona Residents of Delay Free Air Conditioning Repair Services, American Cooling and Heating Progressively Enhances the Dispatch-Enabled Trane AC Replacement and Trane AC Repair Support Services Available To Their Gilbert A/C Service Center.

American Cooling And Heating provides enhanced Trane Air Conditioning Systems support to Gilbert Arizona and surrounding areas.

“Weather Underground predicts Friday temperatures in Gilbert to crest at 113 degrees Fahrenheit with highs across the board for the month lingering around 109. We have to be prepared for emergency AC service requirements. Here at AC&H, we are making Trane Air Conditioning replacement equipment a main line of defense. We have also stocked up on Trane AC repair components,” Management, AC&H Gilbert AC service center.”

American Cooling and Heating – Prominent Gilbert Information Resource Center

AC&H is a long-time supporter of Trane HVAC products. The company Website provides an extended library of Trane AC manuals, PDF training guides and unit-specific consumer brochures. The web site HVAC news center offers various Trane AC repair tips and Trane equipment maintenance tips. Keeping home and business central air conditioners performance enabled, efficiency empowered and service assured is the primary AC&H goal for this Gilbert workforce enhancement program.

Modernized Equipment

Servicing Trane air conditioners can get complex. The new aluminum-based coil systems require better protection and slightly different cleaning methods than do the older copper-based coil systems. The condenser coils are no longer merely wire wrapped, easy to clean and easily susceptible to external damage factors. Unit cabinets are designed to fully encase the condenser coils. Splashing off dirt with a water hose is no longer the basic means of cleaning.

And it is not merely a condition relevant to aluminum coils. In an effort to reduce manufacturing expenses and to provide the same cooling capacity as the Trane ComfortLink™ systems, makers of copper-based condenser coils have switched to thinner wall tubing. As such, the damage risk factor increases over the associated risk factors of older units. Copper coils, just like the aluminum units, are now fully confined within a heavier cabinet structure.

Any type of efficient Gilbert AC repair, Gilbert AC maintenance or Gilbert AC replacement service involves the need for greater technical know-how, service skills and specific unit training. Every type of AC service call now demands more time and concern with technical applications.

Helping Gilbert Customers Avoid Air Conditioning Downtime

When a Gilbert AC service tech fails to arrive on time, customers suffer additional discomfort, wasted time and, in some cases, serious health threats. By ramping up the availability of trained field technicians, American Cooling and Heating can assure Gilbert business owners and homeowners that delayed arrivals, missed appointments and unnecessary system downtime can be avoided.

Founded in 1993, AC&H has crafted a reputation for integrity, quality AC workmanship and extended customer services. Arizona desert temperatures push air conditioning equipment to the limits of durability. The AC&H heating and cooling service team provides on time, reliable and technically proficient Gilbert Arizona Trane AC repair services and Gilbert Arizona Trane AC replacement services.

From handling the recommended Trane bi-annual preventative maintenance service process to responding to emergency health-related Trane AC repair requirements, American Cooling and Heating is prepared to meet the most stringent Gilbert cooling complications with a minimum of fuse, delay or expenses. The AC&H technicians arrive on time in a fully equipped service vehicle and with the skills necessary to assure that the repaired or replaced air conditioning unit functions at the best efficiency level available to the given model of Trane AC equipment.

Reliable Gilbert Trane AC Maintenance Services

Beat down the brutal Gilbert Arizona summer heat wave. American Cooling and Heating maintenance services included:

 Clean or replace air filters
 Cleaning inside the system cabinet
 Cleaning the coil
 Correcting any refrigerant-related pressure problems
 Clearing all drain openings
 Inspecting fan blades
 Lubricating fan motors in cases where lubrication is possible
 Examining the control box, relays, circuit boards and other control accessories
 Pressure test the compressor and tubing
 Examine existing duct system for leaks or torn insulation
 Remove dirt, lint and soil from the evaporator coil.

Full System Gilbert AC Replacement Services For Trane and Others

AC&H is fully licensed, bonded and Insured for any Valley Metro AC replacement or AC repair service. The company provides 24-hour turn-around, professional heating and air conditioning replacement and installation services in Phoenix AZ, Paradise Valley AZ, Gilbert AZ, Mesa AZ, Scottsdale AZ, and all other areas in Arizona. Licenses are as follows:

 AZROC K79 license 183933 Residential, Commercial, Industrial, HVAC and Refrigeration Contractor.
 AZROC KB2 license 238225 Residential, Commercial General Contractor.
 TDLR TACLA21146C Residential, Commercial, Industrial, HVAC and Refrigeration Contractor.

Supported heating and cooling products include Amana, Carrier, Goodman, Rheem, Trane and all other major brands. The AC&H team is trained commercial, industrial and residential AC replacement, installation, repair and services. Prices, discounts and warranties are competitive to other value-added Gilbert AC repair centers.

Furthermore, AC&H warrants that their Gilbert AC repair and replacement program is second to none if quality, reliability and durability.

Schedule Now For Immediate Service

East Central West
(480) 699-2516 (602) 734-5422 (623) 335-7697

 

Heat Pump Prices – Who Needs a Premium Heat Pump For Their Phoenix AC Installation Project?

Written by Rm Harrington on . Posted in AC Service, Heat Pumps, Trane.

Heat Pump Prices – A Difficult Buyer Decision

Like all products, the scale for setting heat pump prices keep changing. So many options affect the final figures. And setting a dead rate for today may be totally out of line for tomorrow. With the availability of so different classes for heat pump performance, homeowners may have trouble dividing the line between AC quality and AC pricing. Sales hype can easily conceal the savings associated with value-added Phoenix AC installation services. If not careful, the buyer ends up with an incorrectly installed quality heat pump that performs below the standards of an entry-level air conditioning system.  

Homeowners and even Phoenix business owners can get caught up in the press for premium heat pump installation services versus the value of jumping to the top of the central air conditioning product line. Logo AMC for Phoenix AC installationYet choosing a lower product efficiency class is not always a bad idea. Buyers must always consider the long-term purposes associated with a new AC installation project. 

For example: Unless dealing in a very high profile residential area, most house flippers will install lower end heating and cooling systems. This may not always mean “cheap” but it can mean fewer bells and whistles. Likewise, rental units are typically equipped with lower class heat pumps. And so it is also for homeowners. If you are planning for a near-future housing change – perhaps a shift from Mesa to Scottsdale, why pay top dollar for a Mesa AC installation project only to encounter the same need five years later at your new Scottsdale home. 

The following heat pump price tips along with the associated unit quality classes will help you narrow the playing field. Perhaps you need a premium heat pump for your Phoenix AC installation project or maybe a moderate efficiency system will do just as well. 

AC and Heat Pump Price Comparisons 

As article content ages, price comparisons change. For me to list the ratings and prices of any particular air conditioning system, including air source and/or ducted units, would require that I know the exact prices in your precise time period. Thus the unit  comparisons listed below are top down ranging from most efficient to least efficient. The two primary factors of efficiency include system Seasonal Energy Efficiency Ratio (SEER) and Heating Seasonal Performance Factor (HSPF). However, not every Phoenix AC installation company charges the labor rates – neither do they provide the same quality of installation expertise, customer support or service reliability.

The following details focus on Trane as a token of every reliable manufacturer of quality AC or heat pump products. But I really cannot state current national labor averages, not can I set exact or average product prices. So we are going to compare heat pump efficiency rather than heat pump sales and heat pump installation prices. If you need an exact and current price on a new system, contact your local ACH service center. 

Ultra Efficiency Trane Heat Pumps 

Ultra efficient Trane systems currently ship in three configurations: 1) XL20i, 2) XL16i and 3) XL15i. These compare to the premium products of other manufacturers such as the Amana, Carrier and Rheem. However, the Carrier Infinity line pushes a higher SEER rating than the upper level Tranes, including a plus four on HSPF ratings. Therefore Carrier Infinity pricing can exceed the Trane Ultra Efficiency pricing by as much as sixty percent. 

Th XL20i rates 19 SEER and 9 or less on HSPF. The average pricing for these units unit with thermostat and furnace, including system installation depends on the tonnage of the system and the layout of your home or business. For example: contractor’s wholesale cost for a 2-ton will typically come in cheaper than the cost of a 5-ton unit. The average average cost for Phoenix AC installation not including any need for new or modified ductwork will include a margin for profit as well as the current cost of labor. However the installation costs of larger units will increase proportionally to the need for additional work. Expect the Trane XL16i, rated at 18 SEER with a 9 or less HSPF to price out more expensive than the Trane XL15i, which rates out at 16 SEER and sports a standard HSPF that can reach as high as 9. But also realize SEER rating often directly influences heat pump prices.    

High Efficiency Heat Pumps Pricing Based On Trane Systems 

Trane XR15 AC UnitTrane high efficiency heat pumps ship in two models: 1) XR15 and 2) XR13. These system fall in line with Carrier’s Performance and Comfort Series. However, the maximum SEER and HSPF of the Performance and Comfort Series are slightly higher than the Trane High Efficiency line. Likewise, the cost of product plus the cost of Phoenix heat pump installation for both Carrier Performance systems and Carrier Comfort systems is a nearer match to pricing of Trane’s Ultra Efficiency systems rather than the Trane High Efficiency system. The Comfort line typically prices out less than the Performance line. 

Back to a focus on Trane High Efficiency units: 

  • Trane XR15 rates at 6.5 SEER. HSPF comes in as high as 9. Unit costs plus installation charges typically exceed the costs of the XR13. Likewise, a 4-ton unit with air handler typically exceeds the price of a 2-ton unit w/out air handler.
  • Trane XR13 carries a maximum 8.5 HSPF and a SEER rating of 14. Being identified as the lower end of the XR series, the Trane XR13 typically prices our below the cost of the XR15. However, the cost of heat pump installation may remain the same no matter which unit you chose. 

Trane Moderate Efficiency Heat Pumps 

Again, there is a distinctive price difference between Trane’s moderate efficiency systems and Carrier’s low-end systems. This is partly due to Carrier’s low-end units supporting a higher SEER rating (16 max) and HSPF rating (9 max). The moderate efficiency Trane system carries a max SEER of 15 and a max HSPF of 8.5. Trane offers twon low-end system configurations:

  • Trane XB14 runs a max of 15 SEER and 8.5 HSPF
  • Trane XB13 comes in at 14.5 SEER and 8.5 HSPC. 

Closing Notes on Heat Pump Pricing  

Heat pump and air conditioning prices vary by manufacturer, unit size, functional extras and the cost of quality Phoenix AC installation. Before closing any deal, complete the following three checkpoints: 

  1. Get multiple estimates from local contractors
  2. Make a balanced comparison, including differences in SEER ratings, HSPF ratings, product performance extras and the skill and reputation of your installer
  3. Use your ears and eyes to notice the little things that distinguish an experienced heat pump professional from a sales rep. 

Finally, make sure you buy according to your current needs and your long-term future goals.

 

 

 

 

 

Valleywide Service • Fast Response 24/7
Call Now For A Free Estimate

(480) 699-2516