Skip to main content
Fast 24 Hour Air Conditioning and Heat Pump Service

Top Quality Workmanship, BBB A+ Rated, AZ ROC Complaint Free

Call Now (480) 699-2516

Leaky Heat Pumps Expensive To Operate and Unhealthy Too

Written by Rm Harrington on . Posted in AC Service, Air Conditioning, Cooling Tips, Heat Pumps.

Leaky Heat Pumps - Old CarrierLeaky Heat Pumps Waste Refrigerant

Although leaky heat pumps may waste refrigerant, they do not consume refrigerant. If your home or business Phoenix air conditioning system requires frequent refrigerant “top-offs,” the unit is not using refrigerant; it is leaking refrigerant. For you this means increased operating costs, less HP efficiency and possible contamination the eco-system.

Any HVAC unit that requires frequent refrigerant charges should be checked for cause and effect. You need to understand that merely adding refrigerant is not a variable solution to the leaky heat pump expensive operating faults. Quality Arizona Air Conditioning Repair never simply add AC refrigerant to a leaking heat pump. Testing the system is the only efficient solution to a heat pump or AC leak. This means isolating and repairing the leak before correcting the system’s refrigerant pressure.

 

Older Leaky Heat Pumps Use Unhealthy Chlorodifluoromethane Gases

Since the early 1990s, the U.S. has been in the process of phasing out chlorodifluoromethane (HCFC-22 or R-22 or Freon) refrigerants. Identified as a substance that depletes the planet’s ozone layer, Freon actively contributes to the dangers associated with global warming. Regulated under the 2010 Clean Air Act, Freon is banned from use in new heat pumps and other air conditioning equipment.

In order to prevent further atmosphere contamination, the U.S. Environmental Protection Agency (EPA) promotes recycling the gas from old air conditioning and leaky HP pump equipment. Beginning in 2020, R-22 will no longer be available for use in existing heat pumps and other air conditioning equipment. Diminishing supply is creating a continuously increase in the cost of R-22 gas. This makes your leaky HP expensive to operate as well as unhealthy to you and the rest of the world.

 

Leaky Heat Pumps Expensive To Operate

Old or new, any leaky air conditioning system is expensive to operate: 1) Because it requires additional service calls, 2) Because it functions less efficiently than a fully charged system and 3) Because it provides less household comfort. However, for older Freon-based air conditioning and heat pump units, make sure you call a Phoenix Heat Pump repair center that is EPA certified for R-22 issues. Typically identified as “Section 608 certification,” the EPA tech certification assures you that your Arizona heating and cooling repair center understands the laws, allowable uses and discharge specifications concerning R-22 refrigerant.

But remember, the cost of Freon is on the rise. Not all shops equally price the gas, so make sure you ask in advance what it will cost per pound to charge your system is leaky freon is an issue.

You might also want to consider replacing your worn Phoenix Heat Pump system. Modern HVAC equipment is remarkably more energy efficient that the older units. Along with the use of new less-expensive EPA-approved refrigerant gases, modern Heat Pumps also: 

  • Consume less electricity
  • Provide better whole-home comfort
  • Are designed for longer durability
  • Require fewer AC and Heat Pump service calls
  • Include extended product warranties and Air Conditioning installer guarantees.

 

Avoid the Waste, Expense and Health Issues

Don’t put up with the expensive waste of freon associated with leaky heat pumps. Arizona-based American Cooling and Heating provides Valley-wide residential and commercial air conditioning and heating repairs, services and installations. Our technical service team is on hand 24-hours per day, providing free estimates and repairs for all types of: 

  • Air handlers
  • Cooling equipment
  • Heat pumps,   
  • Furnaces
  • Refrigeration
  • And other HVAC Equipment.

Look for us throughout the Phoenix Arizona Metro region and all surrounding cities, towns and areas. For more info, click here.

 

 

 

 

HVAC Phoenix Arizona Consumer Guide For Air Conditioning Replacement

Written by Rm Harrington on . Posted in AC Installation, AC Replacement, AC Service, Heat Pumps, HVAC Sales.

HVAC Phoenix Arizona ServicesShould You Replace Your HVAC Phoenix Arizona Equipment?

According to the HVAC Phoenix Arizona field service team at American Cooling and Heating, the technology of modern home and business air conditioning equipment enables A/C installers to better custom-fit heating and cooling products to the precise needs of Arizona Air Conditioning customers. Energy Star qualified heat pumps and central A/C units provide better service, better long-term energy savings and better reliability than the decade old counterparts of yesteryear.

When your heating and air Phoenix equipment needs indicate product replacement, consider the following important points of interest: 

  • How do the up-front costs compare to the projected long-term savings?
  • Will current rebates or other buyer incentives help reduce the purchase and installation price?
  • Which brand best fits your specific HVAC Phoenix Arizona environment?
  • How do you compare brand reputation and dependability to actual air conditioning brand performance? 

 

Installing Phoenix Air Conditioning, The First Step

Functionality is the primary concern, but the age of your home A/C system also plays a major role in choices. The following checklist comes from resources at Energy Star, but it also includes several “common-sense” thoughts from the Heating and Air Phoenix professionals at American Cooling and Heating: 

  • Age – If your A/C is over 10 years old, a newer unit can reduce your Arizona cooling and heating cost by as much as 30 percent
  • Excessive Noise – Some older units are just plain loud, but sometimes excessive noisy indicates problems with the indoor coil; call for service at: East (480) 699-2516   Central (602) 734-5422   West (623) 335-7697
  • Functionality – If your existing Phoenix Air Conditioning system is damaged beyond a cost-effective repair, upgrading becomes a no-brainer.
  • Performance – If your existing heating and air Phoenix equipment is undersized for the selected environment and cooling area, upgrading can save you money and provide a better level of home comfort
  • Reliability – When an older cooling system begins to accumulate frequent repair bills and energy consumption costs, a unit replacement may provide a less expensive and more comfortable solution to the problems.

 

Installing Phoenix Air Conditioning, Paying Yourself

A decision to install new home A/C equipment is guided by to areas of motivation: 1) Home comfort and 2) The cost of energy. Yet, like young lovers walking in the moonlight, comfort and costs go hand in hand. When your Arizona home’s HVAC system fails to provide family comfort, that system typically consumes excess energy. Installing new Phoenix Air Conditioning is of little value if it fails to provide you and your family with comfort and energy efficient costs savings. Make sure the two decision-making components align.

 

Installing Phoenix Air Conditioning, Shopping for SEER

The A/C standard, Seasonal Energy Efficiency Ratio (SEER) indicates the expected efficiency of a given cooling unit. Higher SEER ratings typically indicate better cooling at lower operating expenses. There is, however, a break line, a point where gain in your particular situation gets maxed out. When buying new HVAC Phoenix Arizona equipment, ask your installer to clearly explain the benefits of each level of SEER increase. In short: Don’t oversize the unit.

 

A/C Buying Guide Conclusion

The end is rather clear: To save money and ensure home comfort, replace your Arizona Heat Pump or A/C system with a durable, accurately sized and professionally installed system. Look for rebates and other price reductions. Remember also that there is a difference between a warranty and a guarantee. The first insures the product. The second ensures the quality of the installation and the customer support. For information on the American Cooling and Heating customer guarantee, click here.

 

 

Is Your Amana Air Conditioning Installation Designed For Scottsdale, Arizona?

Written by Rm Harrington on . Posted in AC Installation, AC Replacement, Amana Air Conditioning, Heat Pumps.

Amana Air Conditioning Installation Designed For Scottsdale, ArizonaImprove Your AC Performance With a New Scottsdale Amana Air Conditioning Installation

For efficient operation, your Scottsdale Amana Air Conditioning system must provide something better than 24/7 condenser services. Yet many Arizona homeowners are unaccustomed to the features of an energy-efficient and correctly installed Amana AC unit. They are, in stead, running poorly designed older units that struggle 24/7 against extreme Scottsdale temperatures. This results in a concept of equipment performance that leaves homeowners feeling like the air conditioning process is designed to blow endless streams of cold air.

Yet AC units do not siphon cold atmosphere into the home. Rather they work to reduce humidity while striping the interior air of excess heat. When the Amana Heat Pump is correctly installed and effectively designed to meet the specific requirements of your Scottsdale home, the process provides cost-efficient heating and cooling. Triple digit Arizona temperatures should not force your AC or Heat Pump into a continuous run cycle. If it does, your system:

The expense of fighting Scottsdale, Arizona heat waves with an under-sized, over-sized, out-dated or poorly maintained heat pump or central air conditioning system is four-fold:

  1. Excess running results in higher energy bills
  2. Excess running decreases the life expectancy of your Scottsdale AC
  3. Excess running can trigger AC freeze up, which results in a hot day in the old homestead
  4. Excess running means a higher AC maintenance cost, a disproportionate rate of repair calls and additional loss of work time.

Scottsdale Amana Air Conditioning Installation That Suits Your Arizona Home

Known for durability and reliability, Amana Heat Pumps and Amana Central Air Conditioners are available on several levels of effectiveness. Not every Scottsdale homeowner needs the best of the best. For example: The Distinctions™ line of Amana Heat Pumps are designed to provide inexpensive AC efficiency ranging from 13 SEER units to the SSZ16 Distinction 16 SEER performance product.

Likewise, the Premium line of Amana Heat Pumps starts with a 13 SEER ASZ13 unit and then fires up to the high performance power of the 18 SEER / 9.5 HSPF ASZC18 HP with ComfortNet™ Communication System. This is top-line Amana home heating and cooling. The Amana ASZC18 ships complete with:

  • R-410A chlorine-free refrigerant
  • Short-cycle protection via SmartShift™ technology
  • Short-cycle compressor protection
  • The Copeland® UltraTech™ two-stage scroll compressor
  • Onboard storage of six fault codes accompanied by onboard diagnostic indicator lights
  • The Copeland ComfortAlert™ extended diagnostics system
  • Various factory-installed components, including filter drier, high-capacity muffler and a compressor crankcase heater
  • Pressure switches for low/high operation
  • A two-speed condenser fan motor
  • Standard Lifetime Limited Warranty protection for the compressor
  • Available Asure extended warranty for up to 99-years (compressor only) of affordable, worry-free professionally installed Scottsdale Amana Air Conditioning comfort.

Throughout the continuance of 2013, the Amana ASZC18 Heat Pump as well as many other Amana Air Conditioning products is eligible for U.S. tax credits on high-efficiency residential heating and cooling equipment. In fact, most Amana HVAC products provide exceptional energy savings, often include various cost saving rebates and incentives and, if purchased before the close of December 2013, may be eligible for a U.S. tax credit.

So stop blowing air, wasting energy and consuming your hard earned dollars: Click here to contact American Cooling and Heating.

 

 

 

 

 

 

 

 

 

How to Get the Most From Mesa Amana Premium Heat Pump Installation Decision

Written by Rm Harrington on . Posted in AC Installation, AC Service, Heat Pumps.

Not Just Another Mesa Amana Premium Heat Pump Installation Company

Heat pump installation can be a tricky business. Similar performance and quality between AC manufacturers and their associated products make accurate price comparisons difficult. Buyers often spend hours trying to distinguish the fine-point distinctions between HVAC equipment performance, yet end up forgetting the importance of basing their Mesa Amana Premium Heat Pump installation decision on the quality of the installer.

The product facts are simple. When comparing quality to quality, performance to performance and efficiency to efficiency, Amana’s ASZC Series Premium Heat Pumps are a match for any existing brand. The ASZC product line comes with a mixture of options, enhanced features and performance ratings fit to match the needs of any Mesa home or business. All Amana HP equipment is backed by an industry-leading extensive warranty system, crafted for product endurance and designed to excel at meeting high-end Arizona heating and cooling requirements.

Still, a buyer should not solely focus on equipment features. To gain reliable heat pump service, buyers must also dissect the background, professional behavior, skills and training of the available Mesa Amana Premium Heat Pump installation contractors. The ASZC Series consist of some of the best heating and cooling equipment offered by Phoenix AZ Air Conditioning installation companies, yet if the Mesa Amana AC contractor fails to complete the installation with quality, attention to detail and concern for product effectiveness, the homeowner or the business owner pays a tremendous and unnecessary additional daily operating expense.

Choosing the Right Mesa Amana Premium Heat Pump Installation Company

Let’s say that the Amana Premium HP fits the bill for your home. Here’s what you need from the Arizona AC installation contractor:

  • A list of recent installs, including contact numbers
  • A list of older installs that can provide evidence of on-going customer support
  • 24/7 service response even on holidays
  • Evidence of a lengthy business history; you do want someone that will still be around in 10 to 15 years
  • A clear and written explanation of how warranty service is handled for both parts and labor
  • A detailed and written warranty for parts and service
  • A written and verbal report on which Amana system will be installed and why
  • A detailed explanation of the purposed duct system, including sizing, vent locations, return air plan and type of materials used.

In short, you need to understand what the Mesa Amana Premium Heat Pump Installation crew is doing and why. If you already have an existing duct system, make sure your AZ HP installer analyzes the need for any corrections, upgrades or replacements. If this sounds like lots of attention to detail, you are getting the picture.

Heat Pump Enhancements Included in the Amana ASZC Premium HP Line

Perhaps you have decided on a heat pump but you haven’t yet settled on the Amana Premium heat pump for your Mesa home or business. Considering Arizona climates, the HP will likely provide your primary source for heating and cooling. The Amana ASZC line is designed for enhanced reliability and performance. Perhaps the following factors will help settle your mind to go with a Mesa Amana Premium Heat Pump installation. Here are nine heat pump enhancements that Amana offers to ensure customer satisfaction:

1) Upgraded Compressor – All Amana high-efficiency heat pumps utilize scroll compressors. This means 70% fewer moving parts than a reciprocating compressor.

2) Filter Drier – Included as a factory-installed feature for extended heat pump durability, the Amana filter drier reduces system contaminants in the HP refrigerant system.

3) Crankcase Heater Components – Positioned as a wrap-around addition to the base compressor, the factory-installed Amana crankcase heater component provides several major system enhancements: 1) It reduces the migration of liquid refrigerant in the compressor shell during system shutdown under colder ambient conditions, 2) It reduces noise by eliminating excess liquid refrigerant build up in the shell and 3) It helps regulate system oil flow.

4) Accumulator – By regulating flood-back of liquid refrigerant, the Amana accumulator stores and ensures that only refrigerant vapor is permitted to enter the compressor. The storage and control functions of the accumulator help ensure longer compressor life.

5) Amana Discharge Muffler – Designed to reduce transient complications that can induce system vibration, the Amana discharge muffler effectively reduces system operational noise.

6) Low-Pressure Control Unit – Ensures that your Mesa Amana Premium Heat Pump system provides effective compressor damage control.  The factory-installed Amana low-pressure switch prevents system protection in the event of loss of refrigerant pressure.

7) Updated to R-410A Refrigerant – Designed for environmental friendly use, R-410A is a chlorine-free refrigerant. This product also enhances the reliability and durability of your Amana compressor.

8) Compressor Management – Constructed from high-density materials, the factory-installed Amana sound blanket system ensures that your installed Mesa Amana heat pump functions at a reasonable sound dB.

SmartShift™ Defrost Transition Control – Designed to reduce noise during HP defrost cycles, the Amana SmartShift™ Defrost Transition Control system ensures that your heat pump compressor remains safe during forced defrost cycles. The process is automated, seamless and eliminated excess noise during changeover.

American Cooling and Heating For Premier Mesa Amana Heat Pump Installation

For professional installation of Amana heat pumps and other Amana products, click here. American cooling and heading services all regions around Phoenix Arizona Metro, including Mesa, Gilbert and Scottsdale. We offer 24/7 repairs, services and installations for Residential Air Conditioning, Commercial Air Conditioning, and Industrial Air Conditioning.

All major HVAC equipment serviced, including heating, ventilating, and refrigeration products. Call now for an estimate Mesa Amana Premier Heat Pump Installation.

 

 

Getting the Most Out Of Your Phoenix Carrier Heat Pump

Written by Rm Harrington on . Posted in Air Conditioning, Carrier, Carrier Air Conditioning Arizona, Heat Pumps.

Phoenix Carrier Heat PumpCorrectly Managing Your Installed Phoenix Carrier Heat Pump System

 With monsoon-related humidity breaking 80-percent and Phoenix regional temperatures remaining above the 100-plus degree mark, the demand for efficient AZ air conditioning continues to rise. In 1902, Willis H. Carrier invented the first solution to industrial needs for managed internal air control – the air conditioner. Modern home, office and industrial AC equipment now includes basic Carrier central air conditioners, the Performance/Comfort Series Heat Pump, and Carrier’s finest available heating and cooling system, the Infinity Series Carrier Heat Pump with Greenspeed™ Intelligence.

The cost-efficiency, energy-effectiveness and reliability of Carrier Air Conditioning equipment is established by years of quality performance and innovative advancements in AC technology. But what can consumers do to ensure that their Phoenix Carrier Heat Pump performs to the max of it’s design?

 

Avoid the Myths of AC and Heat Pump Management

To get the most out of your installed Phoenix Carrier Heat Pump system, you need to learn the difference between AC myths and AC truths. Effective cooling and heating depends upon right-matching, right-sizing and right-installation of the Carrier HP best suited to your Gilbert, Peoria, Scottsdale or other Phoenix area home or business. However, for the most efficient AC performance, there are also some things that homeowners and business owners should avoid. You need to know the truths concerning the following Air Conditioning myths and misconceptions:

  1. Myth: Setting an AC fan system on continuous action is more economical than an automated system.
  2. Truth: This concept is only valid when your Carrier Heat Pump is using an electronic air filter.
  1. Myth: Shutting the air registers in unused rooms saves operation expenses.
  2. Truth: Correctly installed Phoenix Carrier Heat Pump systems are selected as an exact match to the structural-specific and air-flow requirements of your home or business. Isolating rooms and closing off vents can actually create a pressure imbalance, which ends up decreasing system efficiency while actually forcing your AC motors to work harder.
  1. Myth: Closing interior doors improves heating and cooling efficiency.
  2. Truth: Phoenix Carrier Heat Pump installations are crafted for a closed-loop environment. When installed as a right-sized, right-matched and properly planned cooling system, your heat pump is crafted to provide precise air pressure throughout the home or office. Closing interior doors that lead into rooms that were fitted into the original design of your Phoenix Carrier Heat Pump installation can produce room-specific pressure leaks around ceiling fixtures, exterior doors, wall plates and windows. Thus the system ends up wasting resources by heating or cooling unnecessary regions within the home or even discharging treated air into the outside spaces.
  1. Myth: Selecting a thermostat setting that limits system run time saves money.
  2. Truth: In order to efficiency perform moisture removal, an installed Phoenix Carrier Heat Pump needs a continuous run of eight to ten minutes. Due to excessive starting and stopping, short running spans create unnecessary motor wear. Furthermore, humidity levels remain high due to the systems inability to fully remove internal moisture. One way to help eliminate short runs: Install a Carrier two-stage AC system.
  1. Myth: Maintaining a constraint and certain thermostat setting provides cost-efficient heating and cooling.
  2. Truth: Scheduled thermostat changes can provide very effective reduction in heating and cooling costs. Your installed Phoenix Carrier Heat Pump should include a matching programmable thermostat control unit. For example: The Carrier Infinity® Series Heat Pump With Greenspeed™ Intelligence includes a unique-variable-speed technological feature that enables automated management of longer running, lower speed air flow. The effective result: Higher comfort, better efficiency and increased savings in heating and cooling costs.

 

Carrier Greenspeed™ Air Conditioning Technology In Arizona Provided By American Cooling And Heating

 

The modern world relies on the efficiency of Carrier Heat Pump technology. From industrial refrigeration solutions to home comfort needs, American Cooling and Heating provides 24/7 Carrier equipment services, repairs and installations. The necessities are at hand. The ACH trucks are loaded and ready to roll. From homes to offices and from schools to hospitals, American Cooling and Heating has a Carrier HP system that will work for your needs.

To learn more, click here.

 

American Cooling And Heating provides Carrier Air Conditioning and Heating Equipment and Professional AC Installation Services for Chandler AZ, Gilbert AZ, Glendale AZ, Mesa AZ, Peoria AZ, Phoenix AZ, Scottsdale AZ, Tempe AZ, And All Other Areas.

 

 

Valleywide Service • Fast Response 24/7
Call Now For A Free Estimate

(480) 699-2516